Diaquip Diamond Tools

The Aero^® Core Drill range is the flagship of the Aero brand. Not only are they technologically advanced in design (see segments page) terms, the range is also flexible, with options for every eventuality.

• Specifications

  • 

    Aero^® S

    Wet cutting - reinforced concrete & medium aggregate.

  • 

    Aero^® SW

    Wet cutting - granite & hard materials.

  • 

    Aero^® SW Max

    Wet cutting - heavily reinforced concrete & medium aggregate.

  • 

    Aero^® F

    Wet cutting - reinforced concrete & hard aggregate.

  • 

    Aero^® FW

    Wet cutting - fast cutting in reinforced concrete & hard aggregate.

  • 

    Aero^® FW Max

    Wet cutting - heavily reinforced concrete or high-powered machine, hard aggregate.

  • 

    Aero^® F+

    Wet cutting - abrasive materials.

  • 

    Aero^® DFW

    Dry drilling

• Available Sizes

  • 

    Diameter (mm)	Stocked Lengths (mm)	Standard Working Length (mm)
    32	2000	320
    36	2000	320
    38	1000	320
    40	2000	320
    42	500	320
    46	500	320
    48	450	320
    50	450	320
    52	2000	450
    57	1000	450
    62	1000	450
    67	450	450
    72	1000	450
    77	2000	450
    82	450	450
    87	450	450
    92	1000	450
    102	1000	450
    107	2000	450
    112	2000	450
    117	2000	450
    122	450	450
    127	2000	450
    132	450	450
    142	450	450
    152	2000	450
    158	1000	450
    162	1500	450
    167	450	450
    172	450	450
    177	1000	450
    182	450	450
    187	450	450
    192	450	450
    200	2000	500
    212	1000	500
    225	1000	500
    250	2000	500
    275	1000	500
    300	2000	500
    325	500	500
    350	2000	500
    375	500	500
    400	1000	500
    450	1000	500
    500	1000	500
    550	1000	500
    600	1000	500
    650	1000	500
    700	1000	500
    750	1000	500
    800	1000	500
    850	1000	500
    900	500	500

  • Standard Sizes

    • 32 - 50mmØ, ½" BSP, 320mm WL
    • 52 - 192mmØ, 1 ¼" UNC, 450mm WL
    • 200 - 900mmØ, 1 ¼" UNC, 500mm WL

• Aero^® Core Drill Specification Guide

  In the table below, cross-reference the machinery you require to the type of material with which it is to be used on, to highlight the recommended Core Drill specification for your needs:

  	Hard Reinforced Concrete	Medium Reinforced Concrete	Concrete with heavy steel content or risk of segment loss	Granite & Natural Stone	Ashphalt	General Building Materials
  Hand-held Drilling (Wet)	Aero FW	Aero FW	Aero FW Max	Aero SW	Aero F	Aero S
  Hand-held Drilling (Dry)	N/A	Aero DFW	N/A	Aero DFW	Aero DFW	Aero DFW
  Rig-mounted Drill Motors (2-4km)	Aero F	Aero S	Aero FW Max	Aero S	Aero F+	Aero S
  High Power Rig-mounted Motors	Aero F	Aero F	Aero FW Max	Aero F	Aero F+	Aero F
  Trailer Rig	Aero F+	Aero F+	Aero FW Max	Aero F	Aero F+	Aero F

• Documentation

  • Core Drill Troubleshooting Document (PDF)

• Core Drills also available from:

  • Trimex^3™
  • Zorro^™